
Cheap drills bog down the moment gel gets hard
You set a speed, touch the nail, and the motor drops away under pressure. Filing takes forever, the handpiece warms up in your hand, and the cable and loose bits take over the table.
- Smart-compensated control holds the RPM you set as you lean in
- Up to 50,000 RPM for gel, builder and acrylic removal
- The magnetic stand parks the handpiece upright instead of letting it roll

What it does, and how
Five things you'll notice in the first service.
Up to 50,000 RPM
The motor is rated up to 50,000 RPM, so gel, builder and acrylic come off without the drill dropping speed partway through a nail.
Smart-compensated speed
It holds the RPM you set as you press into the nail, so you don't have to keep feathering pressure to keep the file steady.
A readout, not a guess
The round screen shows your set RPM, the live actual RPM, the direction (F or R) and the battery level at a glance.
Two modes, one button
Press the handpiece button once for start/pause, twice for forward/reverse, three times to swap beginner and professional mode. No need to put it down.
3 mm collet and magnetic stand
Standard 3 mm shank bits seat deep and lock with the knurled collet for low wobble. The magnetic puck holds the handpiece upright between nails.
What it doesn't do
It isn't waterproof and can't be rinsed or soaked, and it isn't a medical or podiatry device. For nail or skin problems, see a professional.
Fits on a normal desk
Cordless unit, one handpiece cable, a stand that keeps the table clear.



Who this drill is for
Great for
- You do your own gel removal and shaping at home
- Working techs who want a cordless unit on the desk
- You switch forward and reverse between left and right hands
- You want RPM shown as a number, not guessed
Not the right pick if
- You want a corded salon box with a foot pedal
- You need a medical or podiatry device
- You need a long warranty or a repair program

A chrome collet that locks bits tight
The front of the handpiece is where wobble and chatter start, so it's built in metal.
- Knurled chrome collet twists open and locks standard 3 mm shank bits
- Braided fabric-sleeved cable plugs into its own Type-C port on the control head
- Leather-texture body with a metal edge band, side power switch and a Type-C charging port on the bottom edge
This drill, a hand file or a salon visit?
What each one actually gives you on removal day.
| This drill | Hand file | Salon visit | |
|---|---|---|---|
| Holds speed through hard gel | ✓ | ✕ | ✓ |
| Set RPM and direction shown on screen | ✓ | ✕ | Varies |
| Cordless at your own desk | ✓ | ✓ | ✕ |
| Forward and reverse for either hand | ✓ | ✕ | ✓ |
| No appointment needed | ✓ | ✓ | ✕ |
| Someone else does your dominant hand | ✕ | ✕ | ✓ |
| Starter bit set included | ✓ | ✕ | ✕ |
Tips for a clean first session
Three habits that prevent a frustrating start.
Charge it first
Run a full charge before the first service so the battery indicator reads true and the session isn't cut short halfway through.
Start in beginner mode
Press the handpiece button three times for beginner mode, learn the feel on one nail, then switch to professional.
Seat the bit fully
Push the 3 mm shank all the way into the collet before locking it. A half-seated bit wobbles and chatters.

Everything you need to start
- Control unit with digital display and rotary knob
- Nail drill handpiece with cable (two handpieces on the Dual Handpiece version)
- Magnetic nail drill stand
- Drill bit set
- Type-C charging cable
- Optional gift box packaging
What happens after you order
Ships in 1–2 business days
Orders are processed Monday to Friday, excluding holidays.
Tracked delivery
Usually 5–8 business days after shipping, with a tracking number for every order.
Damaged or wrong item?
Free returns within 15 days of delivery. Damaged or wrong item? We replace or refund it.
What people ask most
Will it get through hard gel and acrylic?
That's what it's built for. The motor is rated up to 50,000 RPM and smart-compensated control holds your set speed as you press in, so it doesn't drop away mid-nail. Use a bit suited to the product you're removing.
How do I charge it, and how long does it run?
Charge the unit through the Type-C port on the bottom edge with the included cable; the screen shows a battery indicator. The handpiece plugs into its own Type-C port on the control head. No run time is published, so we don't state one.
Which bits fit, and are any included?
It takes standard 3 mm (0.12 in) shank nail drill bits, which lock in with the knurled collet. A starter bit set is included. Bits are consumable and dull with use, so plan on replacing them.
Is it manageable if I'm new to e-filing?
Press the handpiece button three times for beginner mode, which runs gentler, and keep the speed low until you know the feel. It's a cosmetic filing and shaping tool, not a medical device, and it isn't intended for children.
How do I clean it?
Wipe the body and handpiece with a dry or barely damp cloth. It isn't waterproof, so never rinse or submerge any part. Remove the bit after each use and brush dust out of the collet before locking it closed.
What's the difference with the Dual Handpiece version?
It ships with two handpieces instead of one, so you can keep a second bit mounted and ready. The unit runs one handpiece at a time, not both at once. Everything else in the box is the same.
Recensioni
I bestseller di cui tutti parlano
Da TikTok a casa tua: guarda e acquista subito i nostri prodotti più popolari