
Dark sills, and no factory puddle lights
Most cars never get puddle lights, because they're a wired, dealer-level upgrade. So every night you open the door onto a dark sill and an unlit patch of curb, gravel or slush.
- Lights the step-out zone beside the door, not just the cabin
- Switches on by itself as the door swings open — nothing to press
- Goes on with an adhesive pad and a sticker, no door panel removal

What it does, and how
Two wireless lamps, a magnetic switch and a projection lens — that's the whole system.
No tools, no wiring
Peel the double-sided pad, press the lamp onto the lower door panel, stick the label below it. Nothing is cut, drilled or spliced into the car.
Magnetic induction switching
A reed switch reads the sticker on the sill. The door swings away, the lamp lights; the door closes, it goes dark again.
About 2-minute auto shut-off
Leave a door open and the lamp cuts out on its own after roughly two minutes, so the AAA cells aren't drained overnight.
Convex projection lens
Throws a sharp-edged circle about 3 in (7.6 cm) across in white with an ice-blue cast, plus usable light on the ground beside the door.
Side on/off button
One small button on the side wall kills power completely — handy for a car wash, a long parking spell or a battery swap.
What it doesn't do
It doesn't connect to the car's wiring and doesn't replace factory puddle or courtesy lights. It isn't waterproof, isn't a road-legal lighting device, and the emblems are decorative aftermarket artwork, not dealer parts.
Shows up on the way out
Three moments where the circle actually earns its place.



Who these lights are for
Great for
- Cars that never came with factory puddle lights
- Drivers who park on dark driveways or unlit streets
- Anyone who wants an upgrade with no wiring or drilling
- Owners who want it reversible when the lease ends
Not the right pick if
- Your door panel is beveled, curved or heavily textured
- You want a wired light the car powers itself
- You need an exterior or weather-exposed light

A lens bulge that aims straight down
The body is a flat black slab; only the capsule-shaped lens housing breaks the profile, and it points at the ground once mounted.
- Convex lens focuses the beam into a defined circle, not a soft glow
- Slide-off front door holds 3 AAA cells on coil-spring contacts
- Flat rear face for the adhesive pad, with a thin spring clip along one edge
These lamps, stick-on strips or a wired install?
The two things people usually try instead, on the points that matter.
| These lamps | Stick-on LED strip | Wired install at a shop | |
|---|---|---|---|
| No wiring or door panel removal | ✓ | Varies | ✕ |
| Turns on when the door opens | ✓ | Varies | ✓ |
| Projects a ~3 in circle on the ground | ✓ | ✕ | Varies |
| Runs off the car, no batteries to replace | ✕ | Varies | ✓ |
| Installed in a couple of minutes at home | ✓ | ✓ | ✕ |
| Shuts off by itself after about 2 minutes | ✓ | Varies | Varies |
| Switch it off by hand before a car wash | ✓ | Varies | ✕ |
Tips for a bond that holds
Most install problems come from the first five minutes. These three prevent them.
Pick a flat panel
Choose a straight, smooth section of the lower door panel. Beveled or textured plastic won't hold the pad reliably.
Clean with alcohol
Wipe the spot with alcohol, let it dry fully, then press the lamp for 30 seconds so the adhesive sets.
Aim it in the dark
Test at night before committing the sticker. Open the door and check where the circle lands on the ground.

Everything except the batteries
- 2 x LED door projector lamps
- 2 x magnetic induction stickers
- 2 x double-sided adhesive mounting pads
- 1 x user manual
What happens after you order
Ships in 1–2 business days
Orders are processed Monday to Friday, excluding holidays.
Tracked delivery
Usually 5–8 business days after shipping, with a tracking number for every order.
Damaged or wrong item?
Free returns within 15 days of delivery. Damaged or wrong item? We replace or refund it.
What people ask most
Will these fit my car?
They stick on rather than bolt in, so fitment is about the panel, not the model. You need a flat, smooth, straight section of lower inner door panel. Beveled, curved or heavily textured panels won't hold the pad reliably.
What batteries does it take, and how long do they last?
Each lamp takes 3 AAA batteries, which are not included. The supplier doesn't publish a runtime figure, so we don't quote one. The roughly 2-minute auto shut-off helps keep a door left open from draining them.
Do I have to touch the car's wiring?
No. The lamps are self-powered and mount with a double-sided adhesive pad. Nothing is cut, drilled or spliced, and no door panel needs to come off. They don't replace factory puddle or courtesy lights.
How does it know the door is open?
A magnetic reed switch inside the lamp reads the thin induction sticker you place on the sill below it. Door swings away, lamp lights. Door closes, lamp goes dark.
Can it get wet?
It isn't rated waterproof and has no IP rating, so treat it as an interior accessory. Wipe the lens with a dry or barely damp microfiber cloth and keep water out of the battery compartment.
What's in the set?
Two LED door projector lamps, two magnetic induction stickers, two double-sided adhesive mounting pads and one user manual. Batteries are not included.
Anmeldelser
Bestsellere, som alle taler om
Fra TikTok til din dør - se og køb vores mest populære produkter med det samme